3 Hour - Combination Fire Smoke Damper
Airfoil Blade
The FSD-351 combination fire smoke damper employs airfoil blades for point-of-origin control of fire and smoke in static and dynamic smoke management systems. The FSD-351 is qualified to 4,000 ft/min (20.3 m/s) and 8 in.wg. (2.0 kPa) and may be installed in vertical walls or partitions, or horizontally in floors or assemblies with fire resistance ratings up to 4 hours.
Frame: 5" x 1" (127 x 25) galvanized steel hat channel with interlocking corner gusset. Equivalent to 13 ga. (2.4) channel frame. Low profile head and sill are used on sizes less than 13" (330) high.
Blades: 6" x 14 ga. (152 x 2.0) galvanized steel - airfoil.
Sleeve: 16" x 20 ga. (406 x 1.0) galvanized steel.
Axles: 1/2" (13) diameter plated steel hex.
Linkage: Concealed in frame.
Bearings: Stainless steel oilite, sleeve-type.
Seals: Silicone blade edge seals integrally rolled and mechanically fastened to blades. Flexible metal jamb seals.
Actuator: 120 VAC, power-open, spring-close, external mount.
Fire Closure Device:
HS-10 (electric actuators)
PFV (pneumatic actuators)
Fire Closure Temperature: 165oF (75oC)
Minimum Size: 8" x 6" (203 x 152)
Maximum Size:
Single Section: Vertical: 30" x 48" (762 x 1219)
Horizontal: 32" x 48" (813 x 1219)
Multiple Section: Vertical: 120" x 96" (3048 x 2438)
Horizontal: 64" x 96" (1626 x 2438)
UL 555 Fire Resistance Rating: 3 hour (vertical and horizontal)
UL 555S Leakage Class: 1
UL HNLJ.V-5: Ventilation Duct Assemblies
Maximum Temperature: 350oF (177oC)
© Copyright 2024 Pottorff